Rod Holders

245 1 1/4" Round Rail MountExcellent for pontoon boats. Position your Scotty rod holder anywhere on your rail. Provides versatile mounting without having to drill more holes in your boat. Stainless steel fasteners (included) hold this tough mount...

No. 287 7/8" Round Rail MountProvides versatile mounting without having to drill more holes in your boat. Perfect for boats with limited mounting surfaces. Stainless steel fasteners (included) hold this tough mount securely in place. Works with all..…

Side Mount Rod Holder - 9" - Black Side Mount Rod Holders are constructed of injection molded polypropylene with 304 stainless steel mounting brackets. Accommodates rods up to 1-3/4” in diameter. Installs with four #8 RH fasteners (not included).  ..…

Side Mount Rod Holder - 9" - WhiteSide Mount Rod Holders are constructed of injection molded polypropylene with 304 stainless steel mounting brackets. Accommodates rods up to 1-3/4” in diameter. Installs with four #8 RH fasteners (not included).  ...

Rod Holder Cap & Gasket KitFeatures:Soft Black Flange Gasket with Integral Flip-Up CapSoft Black LipReplacement or Upgrade for Older Holders Manufacturer : Perko Manufacturer Part No : 0481DP0BLK UPC : 085226048159

Extension Post f/Cannon Rod Holder - 2-PackFeatures:Extends height of rod holder by 6"Allows forward & backward pivot adjustment Alignment key allows for 360° pivot while holding post securely in place Manufacturer : Cannon Manufacturer Part No :..…

Vinyl Rubber InsertsClamp-On Rod Holder Rubber InsertsOutside diameter is about 1-7/8” or (1.902”) inches.Inside diameter is about 1-5/8” inches.Overall length is 7-1/2” inches Manufacturer : Lee's Tackle Manufacturer Part No : RA5099 UPC : 0968115…

RH5110 degree Medium Duty Vinyl Rubber Insert for RH510, RH527V, RH5112, RH552CB, & RH552XL  Manufacturer : Lee's Tackle Manufacturer Part No : RH511 UPC : 096811591103

RH52630 degree Medium Vinyl Rubber Insert for RH525, RH525SS, RH5325RH52XS  Manufacturer : Lee's Tackle Manufacturer Part No : RH526 UPC : 096811592605

RH52815 Degree Medium Vinyl Rubber Insert for RH529H, RH529HS, RH5329H, RH529XS Manufacturer : Lee's Tackle Manufacturer Part No : RH528 UPC : 096811592803

Plastic 0° Rod & Cup Holder - Drain - Round Top - BlackFeaturesABS Plastic with Round Top0º Rod AngleDrain at Bottom Manufacturer : Mate Series Manufacturer Part No : P1000DB UPC : 857515002193

Plastic 0° Rod & Cup Holder - Drain - Round Top - WhiteFeaturesABS Plastic with Round Top0º Rod AngleDrain at Bottom Manufacturer : Mate Series Manufacturer Part No : P1000DW UPC : 857515002209

Plastic 15° Rod & Cup Holder - Drain - Round Top - WhiteFeaturesABS Plastic with Round Top15º Rod AngleDrain at Bottom Manufacturer : Mate Series Manufacturer Part No : P1015DW UPC : 857515002278

Plastic 30° Rod & Cup Holder - Drain - Round Top - WhiteFeatures:ABS Plastic with Round Top30º Rod AngleDrain at BottomColor: White Manufacturer : Mate Series Manufacturer Part No : P1030DW UPC : 857515002377

Plastic 30° Rod & Cup Holder - Open - Oval Top - BlackFeaturesABS Plastic with Oval Top30º Rod AngleOpen at Bottom Manufacturer : Mate Series Manufacturer Part No : P2030B UPC : 857515002148

Plastic 30° Rod & Cup Holder - Open - Oval Top - WhiteFeaturesABS Plastic with Oval Top30º Rod AngleOpen at Bottom Manufacturer : Mate Series Manufacturer Part No : P2030W UPC : 857515002131

Thru-Bolt Mount Rod HolderFeatures:WhiteUV-Stabilized PolyethyleneFront Access HolePre Drilled Mounting HolesStainless Hardware Not Included Manufacturer : TACO Marine Manufacturer Part No : P04-011W UPC : 045038501013

1 1/4" Square Rail Mount243Provides verstile mounting without having to drill more holes in your boat. Perfect for boats with limited mounting surfaces. Stainless steel fasteners (included) hold this tough mount securely in place works with all Scott…

Poly Rod StrapThe Poly Rod Strap is the best designed and highest quality of any rubber rod holding device on the market. These straps are molded of black polyurethane material that will retain its stretch an remain unaffected by sunlight and most...

Flush Mount Rod Holder - Black Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle. Accommodates rods up to 1-5/8”. Installs with three #12 FH fasteners (not included). Manufacturer : Sea-Dog Manufacturer Part No …

Flush Mount Rod Holder - WhiteFlush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle. Accommodates rods up to 1-5/8”. Installs with three #12 FH fasteners (not included). Manufacturer : Sea-Dog Manufacturer Part No :.…

Side Mount Rod Holder - Black Constructed of injection molded polypropylene. These Side Mount Rod Holders have an integral, molded-in standoff located on the back of the rod holder, allowing direct mounting to any flat surface. Accommodates rods up t…

Stainless Steel Cap for Round Plastic Rod HoldersFeaturesFor use with P1000B, P1000DW, P1015DB and P1015DWFor plastic rod/cup holders with round top Manufacturer : Mate Series Manufacturer Part No : 1000CS UPC : 857515002230

Side Mount Rod Holder - Flat Dark EarthThis side-mount rod holder features an integral, molded-in standoff located on the back of the rod holder. This standoff allows direct mounting to any flat surface. Accommodates rods up to 1-3/4" in diameter...

Side Mount Rod Holder - Flat Dark EarthThis flush-mount rod holder can accommodate rods up to 1-5/8" in diameter. Features a 30° angle. Constructed of UV-resistant injection-molded ABS. Installs with three 1/4" FH fasteners (not included)...

Bracket can be mounted on vertical or horizontal surface. Alignment key allows for 360 pivot while holding rod holder securely in place. Manufacturer : Cannon Manufacturer Part No : 1907060 UPC : 029402034109

Narrow Gunnel Flush Mount Rod Holder - Black These Narrow Gunnel Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle and designed for narrow gunnel applications while accommodating rods up to 1-5/8”. Installs with th…

Narrow Gunnel Flush Mount Rod Holder - White These Narrow Gunnel Flush Mount Rod Holders are constructed of injection molded ABS. Features a 30° angle and designed for narrow gunnel applications while accommodating rods up to 1-5/8”. Installs with th…

Replacement Liner for 70 Series - WhiteReplacement liner for 70 series in-gunnel and clamp-on rod holders. This UV-resistant vinyl liner protects rods.Features:Recessed liner (doesn't come to the top of the tube)Made of white vinyl material Manufact…

Plastic Rod & Cup Holder Backing Plate for Round Rod/Cup Only for 3-3/4" HolesThreaded Backing Plates for replacing existing ø3-3/4 cup holders with ROUND ABS PLASTIC Combination Rod & Cup Holders. Screws are included.For use with Round Top ABS Plast…

Stand-Off Mount Rod HolderFeatures:WhiteUV-Stabilized PolyethyleneFront Access Hole & Integrated Stand-Offs for Easy MountingStainless Hardware Not Included Manufacturer : TACO Marine Manufacturer Part No : P04-091W UPC : 045038520458

Elbow Adapter3/8″ NPT, 1/2″ Barb Manufacturer : Mate Series Manufacturer Part No : EL3812 UPC : 857515002339