NMEA Cables & Sensors

IPG100 (Internet Protocol Gateway) lets you connect Maretron black boxes (MBB100's), Maretron touch screens (DSM800's), PC's, Mac's, tablets, or smartphones to an NMEA 2000 network so you can monitor and control your vessel using Maretron's N2KViewr.…

Solid-State Rate/Gyro Compass w/10m Cable & ConnectorMaretron's SSC300, implementing the second generation of Maretron's award-wining compass technology, is a solid state, rate gyro electronic compass that provides better than 0.7x heading accuracy..…

Ultrasonic Wind & Weather AntennaMaretron's outdoor weather station measures wind speed and direction, air temperature, barometric pressure, and relative humidity. The wind measurement is performed using ultrasonic sensors, which means there are no..…

Fuel Flow Sensor - 2-100 LPHFeatures:Flow Range: 2 LPH to 100 LPH (0.53 GPH to 26.4 GPH)All M1AR fuel flow sensor accessories for the FFM100 are fitted with 1/4" NPT female threadsNominal K Factor: 1000 pulses/L (3785.4 pulses/Gal)Cable Length: 1m (3…

Fuel Flow Sensor - 25-500 LPH/6.6-132 GPHFeatures:Operating Temperature: -40°C to 80°C (-40°F to 176°F)Storage Temperature: -65°C to 170°C (-85°F to 338°F)Port Size: 1/4" NPT FemaleCable Length: 1M (3.28 ft)Maximum Viscosity: 1000 cPsPressure: 68.95 …

Maretron's DCM100 Monitor is an advanced electronic monitoring device used to measure the voltage and current of any direct current (DC) power source or load. Examples of DC power sources that can be monitored with the DCM100 include batteries,...

GP330BThe GP-330B is a high performance GPS Receiver designed for any type of vessel. This compact and cost-effective receiver offers extremely accurate position fixes, within 3 meters with the WAAS mode activated. The GP330B is capable of data outpu…

GP330B/0183 GPS Sensor with 10M NMEA0183 Cable The GP330B/0183 is sold with a 10M cable that is terminated with a conventional 7-pin connector, delivering true "plug-and-play" compatibility with Furuno products and other NMEA0183 devices.Features:Rob…

Micro Bulk Cable Single Piece - 100M SpoolMicro bulk cable is primarily used as drop cable, but it can also be used as the trunk line depending on network power requirements. Bulk cable with field-attachable connectors allows for maximum flexibility …

Current Transducer with Cable - 400 AmpMaretron's Current Transducer is used specifically with Maretron's ACM100 Alternating Current Monitor.Features:400 AmpIncludes CableWARNING: This product can expose you to chemicals including NICKEL (METALLIC) w…

Fluid Pressure MonitorMaretron's Fluid Pressure Monitor is used to adapt up to six pressure transducers to the NMEA 2000® network (pressure transducers sold separately). This allows you to observe fluid pressures and tank levels anywhere on the vesse…

Submersible Pressure Transducer 0-3 PSIMaretron’s submersible pressure transducers indicate tank levels and can be installed directly in the tank. Please follow these instructions to mount and connect a submersible pressure transducer to an NMEA 2000…

ACM100 Alternating Current MonitorMaretron's ACM100 is a device which monitors AC power sources and outputs information about these sources onto the industry standard NMEA 2000® marine data network. The ACM100 can monitor power busses, generators, or…

DST810 Plastic Smart Sensor 235kHz - NMEA 2000 - BluetoothDepth, Speed-Through-Water, Water Temperature, Boat AttitudeFor a product to be considered a “breakthrough,” it has to vastly change conventional behavior and enhance abilities. The  DST810 Sm…

Fuel Flow MonitorPart #: FFM100-01Maretron's FFM100 provides precision fuel flow information to help optimize fuel consumption, which can save thousands of dollars in fuel operating cost. The FFM100 uses state-of-the-art, positive displacement meteri…

Solid-State Rate/Gyro Compass without CablesMaretron's SSC300, implementing the second generation of Maretron's award-wining compass technology, is a solid state, rate gyro electronic compass that provides better than 0.7x heading accuracy through q4…

Clipper NMEA 2000 Compliant Wind SystemThe Wind System consists of the version 2 mast head sensor and a small translator box, the box is fitted with a ‘micro-c’ connector which plugs directly into an existing NMEA 2000 network.NMEA 2000 Compliant Win…

IF-NMEA2K2The IF-NMEA2K2 is an interface to convert data from NMEA0183 format to NMEA2000 / CAN bus format and vice versa. In addition to the normal conversion mode, the High Speed mode to convert sensor data for Autopilot as well as an AIS mode...

J2K100 NMEA 2000® / J1939 Bridge (Engine/Transmission/Genset Gateway)Maretron's J2K100 attaches directly into J1939 networks of compatible engines, transmissions, and gensets and converts the J1939 engine data to the NMEA 2000® marine digital interf…

Maretron's DCR100 contains 6 Direct Current (DC) relays, each capable of switching up to 10amps. The DCR100 connects directly to an NMEA 2000 network, so you can turn on and off the relays from any device onboard or remotely running Maretron's N2KVie…

SIM100 Switch Indicator ModuleMaretron's Switch Indicator Module monitors switch closure devices including, but not limited to, safety equipment (heat, smoke, carbon monoxide, explosive vapor detectors), security systems (motion, vibration, glass bre…

Network Bus ExtenderPart #: NBE100-01Maretron's NBE100 (Network Bus Extender) allows you to extend the maximum node count, network trunk length and cumulative drop length of any NMEA 2000 network. The NBE100 solves bus errors and other electrical iss…

GPS160 TriNav Sensor w/iKonvert NMEA 2000 Interface BundleThe GPS160, a high performance positioning sensor using GPS, Galileo and Glonass satellite systems for exceptional positioning accuracies and redundancies.TriNav technology allows all three...

GPS160 TriNav Sensro with WLN10SM NMEAThe GPS160, a high performance positioning sensor using GPS, Galileo and Glonass satellite systems for exceptional positioning accuracies and redundancies.TriNav technology allows all three systems to be...

Analog - NMEA2000 ConverterThis unit converts analog data from an external sensor to the CAN bus format data.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. ..…

RIM100 Run Indicator ModulePart #: RIM100-01Maretron's Run Indicator Module monitors both AC and DC electrical circuits and reports, over an NMEA 2000 network, whether or not the electrical circuit is energized and running. The RIM100 works equally …

Maretron's TMP100 measures the temperature for up to 6 temperature probes and reports the information over an NMEA 2000 network. The TMP100 supports up to 4 thermistor probes and 2 high temperature thermocouple probes. Optional thermistor probes (-…

GPS200 - NMEA 2000 GPS Antenna/ReceiverMaretron's GPS200 provides reliable position fixes 10 times per second, accurate boat speed four times per second, and precision time once per second. The GPS200 antenna/receiver is a plug-and-play device that i…

Indoor Humidity/Temperature SensorThe IRHT-01 is used in conjunction with Maretron's Current Loop Monitor (CLM100), which allows indoor humidity and temperature to be broadcast over an NMEA 2000® network where it can be monitored from any compatible …

NMEA 2000® Backbone/Drop Cable - 6' (2M) - *Case of 10*Extend your NMEA 2000® backbone with Garmin's 1' (0.3M) backbone/drop cable.Compatible Devices:AIS™ 300/600 Blackbox TransceiverGBT™ 10GCL™ 20 Low-light Imaging CameraGDL™ 40GET™ 10GFL™ 10GFS™ 10…

0183 to N2K Gateway with PC Interface, USBThe NGX-1 is an intelligent gateway that converts NMEA 0183 data to NMEA 2000 (and vice versa), allowing you to share information between devices from the two standards. This creates the possibility of upgrad…

TLA100 NMEA 2000®Tank Level AdapterThe TLA100 is used to adapt commercially available resistive tank senders to the NMEA 2000® network. This allows you to observe tank levels anywhere on the vessel where there is an NMEA 2000® compatible display suc…