Last Chance Archery

The Hang It kit includes a screw in loop for screwing into a tree or wooden blind frame. There are 3 coated triangular hangars that can be hung on the steel loop. There is a 24" coated flexible...

This kit includes upgraded 3" wide blocks for your LCA bow press. Install these blocks onto any LCA press that is copper in color. By upgrading, you'd remove the narrow 2.5" blocks and install wider...

The Limb Lock Kit is a perfect addition to any LCA bow press and is designed specifically for pressing beyond parallel limb bows. The Limb Locks are foam-covered rollers that act as a safety to hold...

The Limb Lock Kit is a perfect addition to any LCA bow press and is designed specifically for pressing beyond parallel limb bows. The Limb Locks are foam-covered rollers that act as a safety to hold...

The vise has a mounting clamp that will spread to 2 3/8 so it can mount to most benches, tables, or an LCA bow press. Included standard with the Revolution Vise would be the Multi-Axis Head and two...

The vise has a mounting clamp that will spread to 2 3/8 so it can mount to most benches, tables, or an LCA bow press. Included standard with the Revolution Vise would be the Multi-Axis Head and two...

This product is the Revolution Vise AR15 Head which works in conjunction with the Revolution Vise. The AR15 Head mounts directly into the magwell of any AR15 model and allows you to work efficiently...

The Stabilizer Head uses a threaded insert that mounts into any bows stabilizer mounting hole. This head can tilt up/down, including levels for precise adjustments. The threaded insert has a quick...

Organize your Revolution Vise heads with this simple product. This version is a press mount optionFeatures:Durable, convenient, simple;Holds any Revolution Vise head ;Scratch-resistant

Organize your Revolution Vise heads with this simple product. This version is a bench mount optionFeatures:Durable, convenient, simple;Holds any Revolution Vise head ;Scratch-resistant

The Last Chance Quick Clip is designed to hold the ends of strings and cables while you tuning your bow to keep them from unwinding. The unit can be mounted to your bow press using the magnet or...

The Last Chance Precision Arrow Prep Kit is perfect for any archer who builds their own arrows. The kit includes brushes, swabs, a deburring tool, a handle, and a case.Features:Tool for archers who...

The Last Chance Mag Bright 5x Magnifier is designed to attach to a table, bow press, or any other surface. It will brighten and magnify your work area.Features:Bright LED light; USB plug included; 5X...

The Last Chance Double Bright Light is designed to be used when building arrows. It can be attached to a fletching jig or the edge of the table with the included clamp.Features:Dual lights; USB plug...

The Last Chance VMP Fletching Station holds all an archer's fletching tools in one area. It includes area for a fletching jig, glue, vanes, wraps, and other fletiching neccessities.Features:Hold all...

The Last Chance Revolution Arrow Tuner allows an archer to square their arrow, check the arrow straightness, tune broadheads, and correct misalignment between arrow components.Features:Broadhead...

The all new LCA Draw Board is the perfect tool, adaptable to all Last Chance presses, for tuning your bow to perfection. Check your timing, draw length, cam lean and set your rest with more precision...

Draw stop fingers allow bows with limb stops to be pressed without removing the draw stop pegs. Sold individually.Features:For use with Last Chance presses;For bow with limb draw stops;Allows...

The Vane Master Pro is designed to fletch all arrow types with minimal adjustment. It will fletch from a 0 to a 5 degree helical both left and right and will fletch all vanes up to 4 in length, as...

The Xbow Fletching Adapter is perfect for fletching any and all Xbow bolt types. It doesnt matter if youre using a flat nock, half moon nock, omni nock or no nock at all; this adapter is just for you...

The Mini Xbow Adapter is specifically made for pressing crossbows that are under 12 axle to axle. With this easy to use adapter you can press crossbows down to 5 axle to axle. This adapter will only...

The PRO parts kit is a 3 box set loaded with a variety of screws, bolts, stabilizer studs, washers, cam spacers, e-clips, bolt spacers and much more in large assortment of sizes. Its the perfect kit...

These weights are the same size overall as a standard 1oz. stainless steel weight but weigh 3oz. This gives you the ability to cut down on your weight length which then cuts down your overall...

This kit is loaded with a wide variety of screws, bolts, stabilizer studs, e-clips, bolt spacers, cam spacers and much more in a wide assortment of shapes and sizes. Whether at home or on the...

The LCA Fletching Activator is great for prepping your arrows for fletching. You can spray your arrow shaft, before you fletch, and it will enhance the bond of the LCA Fletching glue to the arrow...

The LCA Fletching Glue is perfect for all types of fletching. Great for gluing vanes, feathers, points, inserts or bushings. The LCA glue dries fast, but dries soft, for a stronger hold and doesn't...

The Revolution Arrow Saw helps reduce carbon dust plus provide a combination of essential tools for arrow construction. Features include a water drip and vacuum attachment, blade and motor housing,...

The Multi-Angle is a strong, durable, front stabilizer quick disconnect offering adjustable angle setups from zero to twenty degrees in five degree increments. Angle adjustment is easy and tooless...

The Mag Strip is a great organizational addition to bow presses and workbenches holding tools and accessories in place. The large magnetic surface attaches to any metal surface.Features:Magnetic...

Use the wheel kit to put your press on wheels and have the ability to move it anywhere in your shop with ease. This kit includes 4 wheel attachments and 4 thumb screws to lock each one into place...

Fully interchangeable with any Last Chance Press. Install by cutting the current pieces off of your fingers and then slide these new custom molded caps into place.Features:Works with any Last Chance...

The EZ Vise is designed for quick and easy operation. Made to adjust, move and lock into any position possible. Used to be your 3rd hand to hold your bow while you setup different parts on your bows...