Transducer Accessories

Extension Cable with XID - 12-Pin - 10'Extend the cable length of your compatible 12-pin transducer with this 10 foot (3 meter) cable. Supports 12-pin Airmar transducers with XID.WARNING: This product can expose you to chemicals which are known to th…

75WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on bronze and stainless steel housings. You can use wrench 75WR-4 to brace the housing when using this wrench.For use with:B75SS75 Manufacturer : Airmar Manufacturer Par…

117WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings.You can use wrench 117WR-4 to brace the housing when using this wrench.For use with:B117 B150 B744V B744VL B765C SS555 ...

60WR-2 Transducer Hull Nut WrenchA single-handed wrench to tighten the hull nut on 2" bronze and stainless steel housings. You can use wrench 60WR-4 to brace the housing when using this wrench.For use with:B60SS60 Manufacturer : Airmar Manufacturer …

8-Pin Trnasducer Extension Cable- 10'Connect your transducer to your sonar device with this 10'(3M) 8-pin extension cable.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or o…

AD-MTM-HW-MDI MEGA DI+ Trolling Motor Adapter Bracket MEGA DI+ Trolling Motor Transducer Adapter Bracket converts a MEGA Down Imaging+ transom mount transducer for trolling motor use. With a rugged composite design, it conforms to the trolling motor …

MHX-HW MEGA Imaging Metal Transom Mount Bracket MEGA Imaging+ Metal Mounting Bracket allows adjustment of transducer angle. Durable, rugged metal construction ideal for transom-mount installations. Compatible Transducers: XM 9 HW MSI T, XM 9 HW MDI T…

Adapts older SI-TEX transducers to current ones Digital A Cable8-pin Fuji (old type metal plug) to 8-pin CONXALL (plastic waterproof plug). Manufacturer : SI-TEX Manufacturer Part No : DAC UPC : 010407343457

164WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. Th…

9 M SIDB Y - 9-Pin Side Imaging Dual Beam Splitter CableY Cable - Side Imaging and Dual Beam - allows you to use two transducers on one unit without the use of a transducer switch. For use with Side Imaging products only, in conjunction with a dual b…

9 M SILR Y Dual Side Image Transducer Adapter Cable f/HELIX Y Cable - Separates Side Imaging into Left and Right Side Beams - for Side Imaging products only.  Allows the use of two side imaging transducers with one unit without the need for a transdu…

Complete kit for mounting depth transducer inside GRP hull.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns. Manufacturer : Clipper Manufacturer Part No : CLZ-…

MotorGuide Adapter Cables - 4-PinTrolling Motor Transducer to 4-Pin Fishfinder Adapter CableThese adapter cables allow you to connect a compatible Garmin unit to a MotorGuide trolling motor transducer.Compatible Garmin units w/8-pin connector:echo…

Mounting hardware for the XNT transom mount transducers. Includes a kick up bracket.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm.…

Transducer Extension CableUse this 10' (3M) extension cable to connect your 4-pin transducer to your sonar unit.Compatible Devices:echo™ 100echo™ 150echo™ 200echo™ 300cecho™ 500cecho™ 550cWARNING: This product can expose you to chemicals which are kn…

60WR-4 Transducer Housing WrenchA single-handed wrench that holds the main thru-hull housing via the 'wrench flats' on the side of the housing to facilitate tightening of the hull nut.Use wrench 60WR-2 or 60WR-3 for the hull nut.For use with:B60SS60 …

12-Pin To Dual 4-Pin Transducer Y-CableUse this adapter cable when connecting a compatible 12-pin transducer to a compatible 4-pin Garmin device.WARNING: This product can expose you to chemicals which are known to the State of California to cause can…

117WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. Th…

60WR-1 Crows Foot Transducer WrenchTransducer wrenches are available for all bronze low profile transducers. They are used to facilitate holding of the transducer and tightening of the hull nut. Wrenches are constructed of 3/16" thick mild steel. The…

Foulfree Transducer CoatingFormulated by industry-leading scientists and certified by Airmar for transducers.  Fouling on the face of transducers can reduce their sensitivity, bottom-echo returns and positive fish targets.  It can also increase the..…

MHX MXNT Transom Mount Hardware f/MEGA TransducerStainless Steel mounting hardware for the XNT transom mount transducers.WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth…

MHX-HS Transom Transducer Hardware740011-1Features:Durable Construction for Lasting UseImpact Release Mounting BracketLets you repair or replace your existing trolling motor transom mounting bracketIncludes high-speed mounting hardware and product...

0 Degree Livescope Pole MountPosition your Panoptix LiveScope™ LVS32 transducer on this 0 degree pole mount for an optimal viewing angle while ice fishing (works for open water fishing too). Manufacturer : Garmin Manufacturer Part No : 010-12676-15…

0 Degree Pole Mount f/Livescope Plus LVS34Position your LiveScope™ Plus LVS34 transducer on this 0-degree pole mount for an optimal viewing angle while ice fishing (works for open water fishing too). Manufacturer : Garmin Manufacturer Part No :...

Heavy-Duty Transom Mount Bracket w/Spray ShieldMount the transducer on the transom of your boat so it remains in the water at all times to provide excellent sonar returns.  Bracket can be adjusted to allow the angle of the transducer to be parallel w…

LiveScope™ XR Zero Degree Pole Mount for LVS62 TransducerPosition your LiveScope™ XR LVS62 transducer on this 0-degree pole mount for an optimal viewing angle while ice fishing; works for open water fishing too. Manufacturer : Garmin Manufacturer P…

Panoptix™ LiveScope™ LVS12 Transom Mount BracketMount a compatible Panoptix™ transducer on the transom of your boat with this kit.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defe…

Panoptix™ LiveScope™ LVS12 Trolling Motor Shaft MountMount a compatible Panoptix™ transducer on the shaft of your trolling motor with this kit. It's adjustable design fits all shaft diameters, including those on popular Minn Kota® and MotorGuide®...

Transom Mount BracketEasily attach your compatible 4-, 8- or 12-pin transducer to the transom of your boat with this mount that provides excellent sonar returns at all speeds. Manufacturer : Garmin Manufacturer Part No : 010-13070-00 UPC : 75375927…

Trolling Motor Barrel Mount for Panoptix™ LVS32Mount a compatible Panoptix transducer on the barrel of your trolling motor with this kit. It is easily adjustable as it features molded teeth and fits all barrel diameters, including those on popular Mi…

Trolling Motor Shaft Mount for Panoptix™ LVS32Mount a compatible Panoptix transducer on the shaft of your trolling motor with this kit. It's adjustable design fits all shaft diameters, including those on popular Minn Kota® and MotorGuide® trolling mo…

Transom Mounting Bracket for P66 Transducer - 2004 & up Manufacturer : Airmar Manufacturer Part No : 33-479-01 UPC : 801769004656